24-07-2004, 02:04 AM | #31 |
Full Access Member
Join Date: Apr 2004
Location: Espoo, Finland
Posts: 121
|
Had a render error this night. Couple of cold packs from freezer took 5 degrees CPU heat down, seems enough. I need to drill ventilation hose to my newer case, or pipe it some other way. Doubt it will help in July or August.
|
24-07-2004, 03:59 AM | #32 |
Registered Member
Join Date: Feb 2004
Posts: 89
|
Take 1 side of the case off or both and slap a house fan right next to it either blowing into the case or out depending on the size of the fan. I used a 14 incher blowing in but due to the air circulation created by the blades (alot at the edges of the fan, little at the middle), turned it around to suck the hot air out. Both worked great in nasty heat, but sucking the air out worked better. If you have air conditioning, just pipe it through the top of your case (untested but my next try since the fan burned up and bought an A/C unit.).
Just a couple 'brute force' suggestions.
__________________
Meandering to a different drummer.. |
24-07-2004, 05:51 AM | #33 |
Full Access Member
Join Date: Apr 2004
Location: Espoo, Finland
Posts: 121
|
Thanks,
Did and CPU @ 37 celcius full charge, opened all windows and doors too. If you use air condition, coldpacks or such cold instances make sure you have real blow going on in case. I had a flood in my case last night, condenced water and there were no holes in bottom like in my older case. Installed second casecooler on fly, just had forgotten to do it. 1. case fan 1500rpm 2. 2800rpm. My moveable room fan diameter is 42 cm. |
24-07-2004, 06:37 AM | #34 |
Full Access Member
Join Date: Apr 2004
Location: Espoo, Finland
Posts: 121
|
|
24-07-2004, 03:52 PM | #35 |
Registered Member
Join Date: Jan 2004
Location: Canada
Posts: 460
|
i think the blue guy should shake his head in the end when he closes his eyes. just a thought tho. Good anim all the way.
|
25-07-2004, 04:36 AM | #36 |
Registered Member
Join Date: Feb 2004
Posts: 89
|
I only use fans and want to use A/C. A/C actually sucks the huminity out of a room so no condensation fears blowing to the comp (course I keep the case sides off also)..
You know up until your last video post I had NO idea what your video was about. Not bad. I agree with the head shaking Zeeman meantioned and really like the gestures of the other horse. Nice job.
__________________
Meandering to a different drummer.. |
25-07-2004, 08:58 AM | #37 |
Full Access Member
Join Date: Apr 2004
Location: Espoo, Finland
Posts: 121
|
Thanks,
I should have used more words describing what I'm doing. But if you can put it in few words why bother making several hundred images. Eh, I tend to trust my lousy telepathic skills. I like the head shaking tip too. I did not manage to do it with IK last night, it was too much for otherwise great Elbow Dir IK. Next I'll do everything else ready, fixed already Keith the Rats mouth, pronounced better Scrap and Art, and played with lights. If I have time I'll record key for all objects at end and do second render from there with head shaking both head and hands FK. Last edited by Noratio; 25-07-2004 at 09:02 AM. |
27-07-2004, 12:52 AM | #38 |
Full Access Member
Join Date: Apr 2004
Location: Espoo, Finland
Posts: 121
|
I'm probably going to get busy rest of the week and this might be the final.
Made the headwaving and with IK, just had to learn to use extra bank bones in arm, it was done fast but to learn took some time. |
27-07-2004, 01:01 PM | #39 |
The Maya Mountain
Join Date: Jan 2003
Location: Port Orchard, WA
Posts: 654
|
Good progress, Noratio!
Couple things: The movements seem a bit floaty right now. They are currently kind of slowly "swimming" through the air and such. Watch two people talking and you'll see that movements are generally ver deliberate. When he screams "In your mouth!" I'd like to see more emphatic movement from the speaker. Keep it up! |
27-07-2004, 05:51 PM | #40 |
Full Access Member
Join Date: Apr 2004
Location: Espoo, Finland
Posts: 121
|
Yup,
I see what I can do. Can't say that I master Timing and Spacing yet. |
29-07-2004, 01:00 PM | #41 |
Full Access Member
Join Date: Apr 2004
Location: Espoo, Finland
Posts: 121
|
I found cure for swimming. I keyed only extremes and no inbetweens and avoided difficult poses. Now I've made more complex poses, done more dense timing adding those extremes. There is bit shaking cause too dense keying I suppose, eyes don't stay inside of skin...some swimming still cause I haven't given the end for movements.
I have to stay awake all nights. It is much better but: nana-nanaaa-naaanaaa I won't show you, or Mike gives me more advices. Seriously, I think the most enjoyable part of this is just this plying with keys. I don't care that much for modeling. |
29-07-2004, 01:05 PM | #42 |
Full Access Member
Join Date: Mar 2003
Location: Belfast
Posts: 268
|
nice one, I thought I was being smart with the monster talking back... you had it first, well done mate.
__________________
5 point polys, they just need to learn to subpatch and then we can all be freinds.www.thirddayimage.com |
29-07-2004, 04:52 PM | #43 |
Moderator
Join Date: Jan 2003
Posts: 1,702
|
I have to agree with Mike on the more emphasized movement when the horse is shouting "In your mouth" but this is great progress you're showing here.
|
01-08-2004, 04:53 AM | #44 |
Registered Member
Join Date: Feb 2004
Posts: 89
|
Love the arm wiggles in your posted final at "..is art!", fantastic touch.
__________________
Meandering to a different drummer.. |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
July/Aug - Noob - admiralbcd | admiralbcd | Previous Challenges & Competitions Area | 6 | 27-08-2006 05:10 PM |
July/Aug - Noob - Colto | colto | Previous Challenges & Competitions Area | 23 | 21-07-2006 02:06 PM |
July/August-Noob-MPB | jakers | Previous Challenges & Competitions Area | 1 | 07-08-2005 06:43 PM |
July/Aug- scrdude55555 - Noob | scrdude55555 | Previous Challenges & Competitions Area | 28 | 24-07-2005 11:39 PM |
July/Aug-Noob, definitely-JaXanim | JaXanim | Previous Challenges & Competitions Area | 1 | 14-07-2005 09:24 PM |
Thread Tools | |
|