About Us

fusion301 · 23-02-2003, 07:13 PM

Hey guys quick question....Is there a tool/script similar to using bandsaw to select points instead of polys...select two points next to each other and then it selects all points along those connected polys. Similar to bandsaw but only as a selection tool for points?????
Thanks
Ken
I hope this is understandable

fusion301 · 23-02-2003, 09:47 PM

I found this sel_point_chain

selects chain of points after you select two next to each other

http://plaza17.mbn.or.jp/~PICTRIX/index2.html

Kvaalen · 23-02-2003, 09:57 PM

Thanks for the link!
There are some other really cool plugins there too.

Mark · 23-02-2003, 11:34 PM

Grrr... Can't get a translation with Google. Any other recomendations?

Xavier3D · 24-02-2003, 04:56 AM

Try this link ,
http://babelfish.altavista.com/
Seems to do the trick!

Mark · 24-02-2003, 09:58 AM

Cheers Xavier

Bannana_render · 28-02-2003, 06:30 PM

um yeh, u use band saw then go to point mode.... should work... also the ] key selects all points/polys connected to the one you have sellected

fusion301 · 28-02-2003, 07:53 PM

Bannana: this script you select two points and it selects all the points along those vertices (in a line) bandsaw would select each point on each poly you select...so you would then have to deselect half of those points.....

Bannana_render · 01-03-2003, 10:55 PM

ahh ok, see the problem, is there any script that does it for just one line of points?

23-02-2003, 07:13 PM	#1
fusion301 Lifetime Member Join Date: Jan 2003 Location: NJ Posts: 96	Modeling Tool Question Hey guys quick question....Is there a tool/script similar to using bandsaw to select points instead of polys...select two points next to each other and then it selects all points along those connected polys. Similar to bandsaw but only as a selection tool for points????? Thanks Ken I hope this is understandable

23-02-2003, 09:47 PM	#2
fusion301 Lifetime Member Join Date: Jan 2003 Location: NJ Posts: 96	I found something I found this sel_point_chain selects chain of points after you select two next to each other http://plaza17.mbn.or.jp/~PICTRIX/index2.html

23-02-2003, 09:57 PM	#3
Kvaalen Full Access Member Join Date: Jan 2003 Location: Paris Posts: 536	Thanks for the link! There are some other really cool plugins there too. __________________ My Site!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mech Modeling and cell shading - Question	probe3000	Site Questions & Suggestions	2	21-05-2008 07:50 PM
Cuting tool like Knife-tool	aakashem	Modeling	1	12-07-2007 02:14 AM
pen tool	mikefran	LightWave Basics	11	09-04-2003 06:41 PM

About Us

Beginner Training

Connect with

Need help? Email us

Popular Tutorials

Learning Paths

Useful Links

23-02-2003, 11:34 PM	#4
Mark Super Moderator Join Date: Jan 2003 Location: Sunbury, UK Posts: 2,339	Grrr... Can't get a translation with Google. Any other recomendations?

24-02-2003, 04:56 AM	#5
Xavier3D Registered Member Join Date: Feb 2003 Location: Irvine, CA Posts: 1	Try this link , http://babelfish.altavista.com/ Seems to do the trick!

24-02-2003, 09:58 AM	#6
Mark Super Moderator Join Date: Jan 2003 Location: Sunbury, UK Posts: 2,339	Cheers Xavier

28-02-2003, 06:30 PM	#7
Bannana_render Registered Member Join Date: Feb 2003 Posts: 3	um yeh, u use band saw then go to point mode.... should work... also the ] key selects all points/polys connected to the one you have sellected

28-02-2003, 07:53 PM	#8
fusion301 Lifetime Member Join Date: Jan 2003 Location: NJ Posts: 96	Bannana: this script you select two points and it selects all the points along those vertices (in a line) bandsaw would select each point on each poly you select...so you would then have to deselect half of those points.....

01-03-2003, 10:55 PM	#9
Bannana_render Registered Member Join Date: Feb 2003 Posts: 3	ahh ok, see the problem, is there any script that does it for just one line of points?