About Us

Spy323 · 21-12-2004, 03:46 PM

I do 3d since 1 month and it is one of my first projects. The problems are 2 darks for the steps and some holes with the subpatching.

Make your comments

Techi · 22-12-2004, 03:59 PM

this isnt bad

holes can sometimes be where points are not joined, look where the hole is in subpatched mode and check the are out unsubdivided.

i dont know what you mean by "2 darks for the steps"

Spy323 · 22-12-2004, 05:51 PM

Thank you i mean by "the 2 darks for the steps" i used 2 lights and my scene show some ruins in a desert.

Techi · 22-12-2004, 10:07 PM

ahhh you meant 2 shadows, ok

Spy323 · 24-12-2004, 12:20 PM

sorry i don't speak yet a good english

sandman300 · 30-12-2004, 06:06 AM

you could go into one of the lights properties and turn off shaddows. or by the looks of the scene the lights are close enough together that you could likely get rid of one. and increase the others intensity to get the same brightness.

You might also want to experement with different light types to see the effects.

AverageJoe · 30-12-2004, 03:58 PM

oh man. Freeze those pillars and put smoothing on them. YUCK! lol
Seriously though, if it's one of your first it isn't bad at all.

Spy323 · 30-12-2004, 09:20 PM

Thanks for these tips

I will perhaps post others soon if they will not be bad.

Spy323 · 30-12-2004, 09:51 PM

That's a small trip. It's what i do today. Don't forget to make your comments. Please

Spy323

Spy323 · 31-12-2004, 12:21 PM

I have updated my steps and i find it looks better i have deleted the second shadow and put a sky.

sandman300 · 02-01-2005, 01:47 AM

looking good, there is a strange shaddow in the background. my guess is that you have your sky on a polygon. to fix that you could set the sky up as a background, texture environment. or you could use sky tracer 2 (it has some presets.

Spy323 · 02-01-2005, 04:01 PM

the sky is on the background and i did set the sky tracer.

Stéphane Vahlé · 11-01-2005, 10:39 AM

I do 3d since 1 month and it is one of my first projects.

Welcome in the lightwave world

You must to take the time with modelling. Your dolphin can be interesting with some chages of the mesh. Can you post a wire of the dolphin please.

Spy323 · 11-01-2005, 02:18 PM

Yes but i don't know how can I do it

arma · 25-01-2005, 12:18 PM

lol go get him bro

22-12-2004, 03:59 PM	#2
Techi Registered Member Join Date: Mar 2004 Location: Dudley, UK Posts: 185	this isnt bad holes can sometimes be where points are not joined, look where the hole is in subpatched mode and check the are out unsubdivided. i dont know what you mean by "2 darks for the steps" __________________

22-12-2004, 10:07 PM	#4
Techi Registered Member Join Date: Mar 2004 Location: Dudley, UK Posts: 185	ahhh you meant 2 shadows, ok __________________

30-12-2004, 06:06 AM	#6
sandman300 Full Access Member Join Date: Jun 2004 Location: West Lawn, PA Posts: 415	you could go into one of the lights properties and turn off shaddows. or by the looks of the scene the lights are close enough together that you could likely get rid of one. and increase the others intensity to get the same brightness. You might also want to experement with different light types to see the effects. __________________ For Is and Is-not though with Rule and Line And UP-AND-DOWN by Logic I define, Of all that one should care to fathom, I was never deep in anything but--Wine. Stanza fron the Rubayiat as translated by E. Fitzgerald

30-12-2004, 03:58 PM	#7
AverageJoe Registered Member Join Date: Oct 2003 Location: Westfield, Massachusetts Posts: 111	oh man. Freeze those pillars and put smoothing on them. YUCK! lol Seriously though, if it's one of your first it isn't bad at all. __________________ I have no signiture.

02-01-2005, 01:47 AM	#11
sandman300 Full Access Member Join Date: Jun 2004 Location: West Lawn, PA Posts: 415	looking good, there is a strange shaddow in the background. my guess is that you have your sky on a polygon. to fix that you could set the sky up as a background, texture environment. or you could use sky tracer 2 (it has some presets. __________________ For Is and Is-not though with Rule and Line And UP-AND-DOWN by Logic I define, Of all that one should care to fathom, I was never deep in anything but--Wine. Stanza fron the Rubayiat as translated by E. Fitzgerald

About Us

Beginner Training

Connect with

Need help? Email us

Popular Tutorials

Learning Paths

Useful Links

22-12-2004, 05:51 PM	#3
Spy323 Registered Member Join Date: Dec 2004 Location: Lausanne,Switzerland Posts: 61	Thank you i mean by "the 2 darks for the steps" i used 2 lights and my scene show some ruins in a desert.

24-12-2004, 12:20 PM	#5
Spy323 Registered Member Join Date: Dec 2004 Location: Lausanne,Switzerland Posts: 61	sorry i don't speak yet a good english

30-12-2004, 09:20 PM	#8
Spy323 Registered Member Join Date: Dec 2004 Location: Lausanne,Switzerland Posts: 61	Thanks for these tips I will perhaps post others soon if they will not be bad.

02-01-2005, 04:01 PM	#12
Spy323 Registered Member Join Date: Dec 2004 Location: Lausanne,Switzerland Posts: 61	the sky is on the background and i did set the sky tracer.

11-01-2005, 02:18 PM	#14
Spy323 Registered Member Join Date: Dec 2004 Location: Lausanne,Switzerland Posts: 61	Yes but i don't know how can I do it

25-01-2005, 12:18 PM	#15
arma Lifetime Member Join Date: Jan 2003 Location: Chesterfield Derbyshire Posts: 241	lol go get him bro

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steps	H.I.O.M	Finished Work	15	10-02-2005 02:05 PM