About Us

julka · 08-01-2005, 05:55 PM

hi all i have 1 question for you guys!!
is there any tutorials how to make an angine for example for this car????

bullet_evader · 08-01-2005, 10:24 PM

looks good so far!!!
does reminds me of the half-life 2 car/buggy at the moment

but i suppose this is going to change later!

i cant tell you where to find an engine tutorial.

julka · 08-01-2005, 10:50 PM

please tell me where i want to finish this model sune as posible

D
at the moment it stoped but i think i sill finish it

R4s1n · 09-01-2005, 05:17 AM

I can give you one hint... Over at Newtek.com there was a member that modeled an Audi engine. (Maybe a couple months ago.) If you go over there and search around maybe you can ask the guy how he made his engine. If i'm not mistaken it took him about a month to complete the engine.

Nice start on the Lotus so far. I like the detail in the wheels. How many polys per each wheel?

julka · 09-01-2005, 01:17 PM

its would be great from you
i dont care how long the modeling of angin will take i want to finish this model :]]]
i have a lot of others models which is left in my folders and vaiting when i finsh them

DDD
by the wey each of whyls have 5670 polygons

DDD but i think that some of then is not useful:]]]

soory for mistackes if i made some:]]]

R4s1n · 09-01-2005, 07:50 PM

I had a look around and found the link to the thread. First of all are you a member of Newtek.com? If not then you must register before you will be able to see any attached images on the forums.
Link: http://vbulletin.newtek.com/showthre...ht=Audi+engine

Oh and i just saw your thread on there too and i think you should attach that image over here on SimplyLightwave.

I'll search some more after i come from work.

julka · 09-01-2005, 08:40 PM

thank you for your help!!!
yes i'm a member of newtek :] i saw that picture very nice maby i will be lucky and do the same angine

DD

"Oh and i just saw your thread on there too and i think you should attach that image over here on SimplyLightwave."
which one image you saw???? there are lot of my images jus not finished:[
thanks one more time!!!!!

julka · 10-01-2005, 01:40 AM

take a look! and say something:]!

julka · 10-01-2005, 02:06 AM

:p

julka · 10-01-2005, 02:07 AM

thanls to jesus that my pc finisht it

julka · 10-01-2005, 02:11 AM

hey i wondered how old are you guys
can it be that im youngest in here???

DigiMatt · 10-01-2005, 08:06 AM

I think the users of slw pretty much covers most ages.. nice going on the car mate!

julka · 10-01-2005, 10:21 AM

thanks im trying to model this car that ewery body said thet this model is incredible

D
but i gues its very long way to do that:]

Zeeman · 10-01-2005, 08:32 PM

Hey! Looks like a pretty good model so far! Wheels look awesome!:tup:

SLW does actually cover all ages. I just turned 16! Unless there is someone who is 13 or something like that...

R4s1n · 11-01-2005, 05:25 AM

Looks awesome man! One thing i could suggest is for you to look for a lotus seven car manual. That gives a lot of description on how to fix the engine and other bits of details. Are you try to create the engine for a demo reel or something? Anyway don't stop modeling cause your doing a good job.

Oh and i'm 16 as well, almost 17 though.

08-01-2005, 10:24 PM	#2
bullet_evader Registered Member Join Date: Nov 2003 Location: the netherlands Posts: 798	looks good so far!!! does reminds me of the half-life 2 car/buggy at the moment but i suppose this is going to change later! i cant tell you where to find an engine tutorial. __________________ Check out my homepage sometimes the few have to give their lives for the many!!!

08-01-2005, 10:50 PM	#3
julka Registered Member Join Date: Jan 2005 Posts: 16	bullet_evader please tell me where i want to finish this model sune as posibleD at the moment it stoped but i think i sill finish it

09-01-2005, 05:17 AM	#4
R4s1n Full Access Member Join Date: Aug 2003 Location: Manchester, PA Posts: 1,319	I can give you one hint... Over at Newtek.com there was a member that modeled an Audi engine. (Maybe a couple months ago.) If you go over there and search around maybe you can ask the guy how he made his engine. If i'm not mistaken it took him about a month to complete the engine. Nice start on the Lotus so far. I like the detail in the wheels. How many polys per each wheel? __________________ Johnny was a chemist's son, but Johnny is no more. What Johnny thought was H2O was H2SO4.

09-01-2005, 01:17 PM	#5
julka Registered Member Join Date: Jan 2005 Posts: 16	R4s1n its would be great from you i dont care how long the modeling of angin will take i want to finish this model :]]] i have a lot of others models which is left in my folders and vaiting when i finsh themDDD by the wey each of whyls have 5670 polygons DDD but i think that some of then is not useful:]]] soory for mistackes if i made some:]]]

09-01-2005, 07:50 PM	#6
R4s1n Full Access Member Join Date: Aug 2003 Location: Manchester, PA Posts: 1,319	I had a look around and found the link to the thread. First of all are you a member of Newtek.com? If not then you must register before you will be able to see any attached images on the forums. Link: http://vbulletin.newtek.com/showthre...ht=Audi+engine Oh and i just saw your thread on there too and i think you should attach that image over here on SimplyLightwave. I'll search some more after i come from work. __________________ Johnny was a chemist's son, but Johnny is no more. What Johnny thought was H2O was H2SO4.

About Us

Beginner Training

Connect with

Need help? Email us

Popular Tutorials

Learning Paths

Useful Links

09-01-2005, 08:40 PM	#7
julka Registered Member Join Date: Jan 2005 Posts: 16	R4s1n thank you for your help!!! yes i'm a member of newtek :] i saw that picture very nice maby i will be lucky and do the same angineDD "Oh and i just saw your thread on there too and i think you should attach that image over here on SimplyLightwave." which one image you saw???? there are lot of my images jus not finished:[ thanks one more time!!!!!

10-01-2005, 01:40 AM	#8
julka Registered Member Join Date: Jan 2005 Posts: 16	some old pictures! for interested people take a look! and say something:]!

10-01-2005, 02:11 AM	#11
julka Registered Member Join Date: Jan 2005 Posts: 16	hey!! hey i wondered how old are you guys can it be that im youngest in here???

10-01-2005, 08:06 AM	#12
DigiMatt Super Moderator Join Date: Jan 2003 Location: Sweden Posts: 1,182	I think the users of slw pretty much covers most ages.. nice going on the car mate! __________________ http://www.digitalmagic.se mattias@digitalmagic.se icq:1687432 msn: eternal_e@hotmail.com

10-01-2005, 10:21 AM	#13
julka Registered Member Join Date: Jan 2005 Posts: 16	DigiMatt thanks im trying to model this car that ewery body said thet this model is incredibleD but i gues its very long way to do that:]

10-01-2005, 08:32 PM	#14
Zeeman Registered Member Join Date: Jan 2004 Location: Canada Posts: 460	Hey! Looks like a pretty good model so far! Wheels look awesome!:tup: SLW does actually cover all ages. I just turned 16! Unless there is someone who is 13 or something like that...

11-01-2005, 05:25 AM	#15
R4s1n Full Access Member Join Date: Aug 2003 Location: Manchester, PA Posts: 1,319	Looks awesome man! One thing i could suggest is for you to look for a lotus seven car manual. That gives a lot of description on how to fix the engine and other bits of details. Are you try to create the engine for a demo reel or something? Anyway don't stop modeling cause your doing a good job. Oh and i'm 16 as well, almost 17 though. __________________ Johnny was a chemist's son, but Johnny is no more. What Johnny thought was H2O was H2SO4.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lotus Elise S1	Da.Bo	Finished Work	11	18-01-2003 09:53 PM